JCT Brush Cutter Blade Shoulder Bolt
Replaces OEM#
$37.00
Our New Updated Bigger Bolt! Now with 3/4-16 thread.
The original blade will fit our bolt, but we do NOT recommend using the original blade. The plastic bushing in the JCT blade will wear out. This will cause premature wear on the bolt. At some point the original blade will cause the bolt to fail or the bushing will fail and the blade will fly off.
Check your stump jumper to make sure the holes where the bolts go are not worn out. Egged holes will cause premature failure of the bolts. If the holes are egged you will need to drill new holes.
Bush Hog Blade Bolt 3/4-16 thread pitch
Additional information
| Weight | 1.00 lbs |
|---|---|
| Dimensions | 3.3125 × 2 × 1.1875 in |
